Project Eternity Post-funding Update #67: Scheduling and Building

There’s a sixty-seventh update awaiting your gaze over at the Project Eternity Kickstarter campaign, and this time it’s producer Brandon Adler that is showcasing his writing talents. In his write-up, he discusses the challenges of sticking to a lean schedule and the process of building a “small interior dungeon” (with some accompanying art assets):

‘¢ After the paper design and concepts, an area designer creates a 3D blockout of the area in Unity. This allows the designer to walk through the area and make sure it flows well. This also helps to give the environment artist assigned to the area an idea of where the various elements should be laid out. A full blockout of a 3×3 area normally wouldn’t take more than half a day. This is an extremely important part of the process. Sometimes an area seems great on paper, but in practice it is clunky or frustrating.

‘¢ Once the blockout is finished it’s passed along to the area strike team for review. The area strike team includes people from most disciplines. This is the point where revisions are performed and the layout becomes finalized. The changes can be as simple as moving some props around or as complicated as redesigning major portions of the layout. Again, for a small area of this size, we aren’t looking at more than half a day for all of the feedback and revisions.

‘¢ With the blockout in place, the area can move to environment art (For example, Hector “Discoteca” Espinoza) for the art pass. This includes putting together existing pieces and creating new assets to make the area. A large portion of time allotted to an area is spent in environment art. A 3×3 area that uses mostly existing assets would typically get three days of environment art work, but, because we want to have a cool, unique piece in the area we will add about a day of environment art time. This gives a total of four days for the initial art pass.

‘¢ Like the blockout, the art pass is usually reviewed by the area strike team. Revisions can vary wildly depending on how everyone feels about the area, but it isn’t uncommon for another quarter to half a day to be spent on review and revisions for this size of area.

‘¢ Now with the 2D render in place, the area is ready for the real design work to be done. An area designer will typically get about three days to do the first pass on the area. This includes things like a loot pass, encounters, trigger setup, temp dialogs, etc.. Because this area has a quest that is running through it, though, it will get an extra day to work out all of those kinks. That puts us at four days for an initial design pass on the area.

‘¢ Remember the part about this area having a quest? Well, now is when a creative designer (Like Mr. Eric Fenstermaker, for example) comes through to write the dialogs. To be completely honest, this usually comes much later, but it works for our purposes. The narrative designer creates the NPC dialogs, quest dialogs, and companion interjections for the area. Usually an area designer will stub these conversations out and the narrative designer will come in and complete them. Depending on the amount of dialog this should take around a day or two for everything.

‘¢ Finally, a concept artist will take a pass at painting over the final 2D render. This pass is used for “dirtying up” an area and adding in the little details that might be difficult for an environment artist to create. As an example, we can cover up texture seems, add in variation on repeating textures, paint in lighting highlights, and even add things like patina or moss on objects. Due to Photoshop magic from Kaz, we can even propagate those changes into our diffuse maps so they show properly in any dynamic lights. This is a fairly low cost procedure and Kaz can cover a small area like this in about half a day.